Biomass confined water boiler
Pressure phase change boiler specifications: Boiler specifications: 0.35MW, 0.7MW, 1.4MW, 2.8MW, 4.2MW, 5.6MW, 7MW, 10.5MW, 14MW
The biomass confined water boiler is a new type of boiler with the most comprehensive theoretical analysis and experimental research, the most quantity and 20 years running test time. Over the past 20 years, the operation practice of hundreds of thousands of boilers has fully proved that the new type of water-fire tube boiler has the following six advantages determined by the structural characteristics, which is the fundamental reason why this type of boiler has become the "annual output" and "total capacity in use" obviously more than any other type of boiler in China for a long time.
1. Full and constant output: the actual output of this type of boiler can generally exceed the nameplate output by 10~15% due to the use of high-efficiency heat transfer screw pipe and the application of heat transfer and flow resistance formula of "Harbin Institute of Technology - Shanghai Institute of Technology" in the design; Due to the reasonable choice of smoke speed, there is no ash accumulation in the threaded pipe during the normal operation of the boiler, so the boiler output and thermal efficiency do not decrease with the extension of the operation time.
2. The appearance size is small, boiler room investment greatly reduced: because of the use of efficient heat transfer screw pipe smoke, so the outlet temperature ≤130℃ hot water boiler and steam boiler with small capacity can cancel the rear heating surface, and the boiler structure is quite compact, so the boiler appearance size is small, so that the boiler room investment reduced by at least 1/3.
3. Sudden power failure without special protection: because the hot water type adopts mixed circulation, and the boiler water capacity is large, when a sudden power failure, no special protection measures can be taken to prevent the heating surface and boiler shell media may be vaporized caused by damage accidents.
4. Low original dust emission concentration of the boiler: due to the large volume of the furnace and the setting of the dust coarse separation steering chamber at the back of the furnace, the original dust emission concentration of the boiler can be ensured to be lower than the standard allowable value.
Biomass hot water boiler is mainly used for heating and bathing. The hot water boiler circulates the hot water in the heat preservation tank through the hot water circulation pump, and heats the hot water in the tank over and over again to achieve the purpose of bathing; The hot water boiler circulates the hot water through the hot water circulation pump the heating pipeline, through the radiator (radiator) can achieve people's heating requirements; The hot water boiler and the hot water circulating pump together with the heat exchanger can realize the dual functions of bathing and heating.
Application: residential central heating, hotels, bathing, urban and rural heating, and the demand for hot water.
Efficient and considerate service
Pre-sales service: technical consultation at any time, patient guidance and communication;
Sales service: help customers to design layout, reasonable layout and guide the construction.
After-sales service: always pay attention to and help every customer solve all the problems in the process of using our products.
Hot Tags: fully automatic biomass hot water boiler, China, manufacturers, suppliers, factory, price, cost, quotation, for sale, made in China, cost Phase Change Hot Water Boiler, Fully Automatic Biomass Hot Water Boiler, cost Eco friendlybiomass heating boiler, wood chips fuel hot water boiler, cost Three return combustion biomass heating boiler, cost 14MW biomass fired heating boile
